How a custom woodworking commission works, start to finish
August 8, 2026 · 5 min read
Commissioning furniture is unfamiliar for most people. This is exactly what happens after you send the first message, and what we need from you at each step.
1. The conversation
Tell us the room, the use, the deadline and roughly what you want to spend. Photographs of the space are more useful than reference images of other people's furniture — we are designing for your light and your dimensions.
2. Drawing and wood selection
Virgil draws the piece to scale and we pull candidate boards. You see both: the drawing and a photo of the actual stock with the figure we intend to use. Nothing is cut until you approve that pairing.
3. Deposit and the build slot
A deposit reserves a slot on the bench and covers the material. From that point the piece has a date, and we tell you the week it will ship.
4. Milling and joinery
Rough boards are milled flat, left to settle, then milled again — wood that has been sitting in a stack moves once it is opened up. Carl cuts the joinery; Dominic handles laser engraving and any metalwork.
5. Finish
Hand-sanded through the grits, oiled, cured, waxed and signed. Fabric linings and brass are set last so nothing gets marked during finishing.
6. Delivery
Pieces ship nationwide, packed in a crate or double-boxed depending on size, with care instructions for the specific wood you chose. Atlanta-area clients can collect from the shop.
